1. Introduction to the Course
2. Pegs and EndPin
-
2.1. - Peg Shaping and what you need (20:58)
-
2.2. - Peg Shaping and Endpin Shaping (19:51)
-
2.3. - Endpin Fitting & Starting to Fit the Pegs (21:53)
-
2.4. - How deep and How the Pegs Should be (20:11)
-
2.5. - Right Length and Drilling the String Hole of the Pegs (19:53)
-
2.6. - Finishing the Pegs (12:41)
3. The Sound post
-
3.1. - Making your own Soundpost (20:46)
-
3.2. - The Right Soundpost Position (20:03)
-
3.3. - Marking the Bridge Position on the Top Surface (20:48)
-
3.4. - How to Bring the Soundpost Inside and Straight Up (19:04)
-
3.5. - Getting the Soundpost Outside and Trimming when it is Twisting (19:08)
-
3.6. - Fitting it for the Specific Position (11:52)
-
3.7. - Bringing the Sound Post into the Right Position (17:51)
-
3.8. - Fitting the Sound Post and How to make a longer Copy of it (21:54)
-
3.9. - Sound Post Fitting Details (10:58)
4. Upper and Lower Nut
5. Bridge
-
5.1. - Introduction How to Make a Bridge (19:53)
-
5.2. - Planing the Backside of the Bridge (17:59)
-
5.3. - Planing the Bridge to its Thickness 4.2 mm (19:57)
-
5.4.1. - Feet Fitting Theory (20:12)
-
5.4.2. - How to Fit the Bridge Feet (19:49)
-
5.4.3. - Using a Red Lipstick to Mark the Matching Spots (20:40)
-
5.4.4. - Fitting to its Idol Position (19:37)
-
5.4.5. - Final Feet Fitting (15:05)
-
5.5.1. - String Height and String Spacing (19:07)
-
5.5.2. - Perfect Bridge Curve (14:41)
-
5.6.1. - Adjusting the Upper Side to Appear Straight (19:54)
-
5.6.2. - Trimming the Upper Side of the Bridge to Perfection (14:25)
-
5.7.1. - The Bridge Arching and Planing the Area Next to the Edges (20:18)
-
5.7.2. - Creating the Perfect Arching with the File (19:20)
-
5.7.3. - Cleaning the Bridge Arching (7:37)
-
5.8.1. - Explaining the Concept of the Inner Design of the Bridge (20:39)
-
5.8.2. - Filing the Two Holes and Cutting with the Knife (19:32)
-
5.8.3. - Trimming the Inside and the Feets of the Bridge (10:55)
-
5.9.1. - Finishing Details of the Bridge (16:44)
-
5.9.2. - String Spacing and finishing the Upper Side (11:52)
6. Pulling up the Strings
7. Sound Adjustment
-
7.1. - First Adjustments always to be done (17:33)
-
7.2. - First the Ideal Positioning; Searching the Balance (19:51)
-
7.3. - Increasing the E-String; And again from the Beginning (17:19)
-
7.4. - Bridge Feets Position and Soundpost Responsable for the Response (17:27)
-
7.5. - Chinrest Sound Differences (16:38)
-
7.6. - Fingerboard Length; Finetuners Differences (16:37)
